dm t6 010lps document number: ds 37590 rev. 2 - 2 1 of 7 www.diodes.com november 2016 ? diodes incorporated dm t6 010lps 60v n - channel enhancement mode mosfet powerdi5060 - 8 product summary b v dss r ds(on) i d t c = + 25c (note 9) 60 v 8 m? @ v gs = 10v 80a 12 m? @ v gs = 4.5v 79 a description and applications this new generation n - channel enhancement mode mosfet is designed to minimize r ds( on ) and yet maintain superior switching performance. this device is ideal for use in notebook battery power management and loadswitch. ? notebook battery power management ? dc - dc converters ? loadswitch features ? thermally efficient package - cooler running applications ? high conversion efficiency ? low r ds( on ) C minimizes on state losses ? low input capacitance ? fast switching speed ? <1.1mm package profile C ideal for t hin applications ? lead - free finish; rohs c ompliant (note s 1 & 2 ) ? halogen and antimony free. green device (note 3) ? qualified to aec - q101 standards for high reliability mechanical data ? case: powerdi ? 5060 - 8 ? case material: molded plastic, green molding compound. ul flammability classification rating 94v - 0 ? moisture sensitivity: level 1 per j - std - 020 ? terminal finish - matte tin a nnealed over copper leadframe ; solderable per mil - std - 202, method 208 ? weight: 0.097 grams ( a pproximate) ordering information (note 4 ) part number case packaging dm t6 010lps - 13 powerdi5060 - 8 2 , 500 / tape & reel note s: 1 . eu directive 2002/95/ec (rohs) & 2011/65/eu (rohs 2) compliant. all applicable rohs exemptions applied. 2. see http://www.diodes.com/quality/lead_free.html for more information about diodes incorporateds definitions of hal ogen - and antimony - free, "green" and lead - f ree . 3. halogen - and antimony - free "green products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm tota l br + cl) and <1000ppm antimony compounds. 4 . for packaging details, go to our website at http : //www.diodes.com/products/packages.html . marking information bottom view t op view pin configuration top view internal schematic powerdi5060 - 8 pin1 =manufacturers marking t6010ls = product type marking code yyww = date code marking yy = last two digit s of year (ex: 1 6 = 201 6 ) ww = week code (01 to 53) s d d g d d s s powerdi is a registered trademark of diodes incorporate d . t6010ls s s s g d d d d yy ww green
dm t6 010lps document number: ds 37590 rev. 2 - 2 2 of 7 www.diodes.com november 2016 ? diodes incorporated dm t6 010lps maximum ratings (@ t a = +25c, unless otherwise specified.) characteristic symbol value unit drain - source voltage v dss 60 v gate - source voltage v gss 20 v continuous drain current (note 5 ) t a = + 25 ? a = + 70 ? d 13.5 11 a continuous drain current (note 6 ) t c = + 25 ? c = + 70 ? d 80 a 77 maximum continuous body diode f orward current (note 6 ) i s 80 a pulsed drain current ( 10 ? dm 125 a avalanche current , l=0. 1 mh i a s 20 a avalanche energy , l=0. 1 mh e a s 20 mj thermal characteristics characteristic symbol value unit total power dissipation (note 5 ) t a = + 25 c p d 2.2 w thermal resistance, junction to ambient (note 5) r ja 57 c/w total power dissipation (note 6 ) t c = + 25 c p d 113 w thermal resistance, junction to case (note 6 ) r j c 1.1 c/w operating and storage temperature range t j, t stg - 55 to +1 50 c electrical characteristics (@ t a = +25c, unless otherwise specified.) characteristic symbol min typ max unit test condition off characteristics (note 7 ) drain - source breakdown voltage bv dss 60 - - v v gs = 0v, i d = 1m a zero gate voltage drain current i dss - - 1 ds = 48 v, v gs = 0v gate - source leakage i gss - - 100 n a v gs = 20 v, v ds = 0v on characteristics (note 7 ) gate threshold voltage v gs (th) 1 - 3 v v ds = v gs , i d = 250 a ds (on) - 6 8 m ? gs = 10 v, i d = 20 a - 8 1 2 v gs = 4 .5v, i d = 20 a diode forward voltage v sd - 0.9 1.2 v v gs = 0v, i s = 20 a dynamic characteristics (note 8 ) input capacitance c iss - 2 090 - pf v ds = 30 v, v gs = 0v , f = 1 mhz output capacitance c oss - 746 - reverse transfer capacitance c rss - 38.5 - gate r esistance r g - 0.5 9 - ? ds = 0 v, v gs = 0v , f = 1 mhz total gate charge ( v gs = 4.5 v ) q g - 1 9.3 - nc v ds = 30 v, i d = 20 a total gate charge ( v gs = 10 v ) q g - 41.3 - gate - source charge q gs - 6.0 - gate - drain charge q gd - 8.8 - turn - on delay time t d( on ) - 5.7 - n s v dd = 30 v, v gs = 10 v, i d = 20 a , r g = 3 r - 4.3 - turn - off delay time t d( off ) - 23.4 - turn - off fall time t f - 9.7 - body diode reverse recovery time t rr - 35.4 - n s i f = 20 a, di/dt = 10 0a/s rr - 38.2 - n c notes: 5 . device mounted on fr - 4 substrate pc board, 2oz copper, with thermal bias to bottom layer 1inch square copper plate. 6. thermal resistance from junction to soldering point (on the exposed drain pad). 7 . short duration pulse test used to minimize self - heating effect. 8 . guaranteed by design. not subject to product testing. 9. package limited .
dm t6 010lps document number: ds 37590 rev. 2 - 2 3 of 7 www.diodes.com november 2016 ? diodes incorporated dm t6 010lps 0.0 5.0 10.0 15.0 20.0 25.0 30.0 0 1 2 3 4 5 i d , drain current (a) v ds , drain - source voltage (v) figure 1. typical output characteristic v gs =2.2v v gs =2.5v v gs =3.0v v gs =3.5v v gs =4.0v v gs =4.5v v gs =10v 0 5 10 15 20 25 30 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 i d , drain current (a) v gs , gate - source voltage (v) figure 2. typical transfer characteristic v ds = 5v - 55 25 85 150 125 0 0.002 0.004 0.006 0.008 0.01 0.012 0.014 0.016 0.018 0.02 0 5 10 15 20 25 30 r ds(on) , drain - source on - resistance ( ? ) i d , drain current (a) figure 4. typical on - resistance vs. drain current and temperature v gs = 4.5v - 55 25 85 150 125 0.004 0.005 0.006 0.007 0.008 0.009 0.01 0 2 4 6 8 10 12 14 16 18 20 r ds(on) , drain - source on - resistance ( ? ) i d , drain - source current (a) figure 3. typical on - resistance vs. drain current and gate voltage v gs =4.5v v gs =10v 0 0.002 0.004 0.006 0.008 0.01 0.012 0.014 0.016 0.018 0.02 - 50 - 25 0 25 50 75 100 125 150 r ds(on) , drain - source on - resistance ( ? j , junction temperature ( gs =5v, i d =5a v gs =10v, i d =10a 0.4 0.8 1.2 1.6 2 - 50 - 25 0 25 50 75 100 125 150 r ds(on) , drain - source on - resistance (normalized) t j , junction temperature ( gs =5v, i d =5a v gs =10v, i d =10a
dm t6 010lps document number: ds 37590 rev. 2 - 2 4 of 7 www.diodes.com november 2016 ? diodes incorporated dm t6 010lps 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 - 50 - 25 0 25 50 75 100 125 150 v gs(th) , gate threshold voltage (v) t j , junction temperature ( d =250 a i d =1ma 0 5 10 15 20 25 30 0 0.3 0.6 0.9 1.2 1.5 i s, source current (a) v sd , source - drain voltage (v) figure 8. diode forward voltage vs. current v gs =0v, t j = - 55 v gs =0v, t j =25 v gs =0v, t j =85 v gs =0v, t j =125 v gs =0v, t j =150 1 10 100 1000 10000 0 10 20 30 40 c t , junction capacitance (pf) v ds , drain - source voltage (v) figure 9. typical junction capacitance f=1mhz c iss c oss c rss 0 1 2 3 4 5 6 7 8 9 10 0 5 10 15 20 25 30 35 40 45 v gs (v) q g (nc) figure 10. gate charge v ds =30v, i d =20a 0.1 1 10 100 1000 0.1 1 10 100 i d , drain current (a) v ds , drain - source voltage (v) figure 11. soa, safe operation area t j(max) =150 c =25 gs =10v r ds(on) limited p w =1s p w =100ms p w =10ms p w =1ms p w =100 s p w =10 s p w =1 s
dm t6 010lps document number: ds 37590 rev. 2 - 2 5 of 7 www.diodes.com november 2016 ? diodes incorporated dm t6 010lps 0.001 0.01 0.1 1 1e - 06 1e - 05 0.0001 0.001 0.01 0.1 1 10 100 1000 r(t), transient thermal resistance t1, pulse duration time (sec) figure 12. transient thermal resistance r jc (t)=r(t) * r jc r jc =1.05
dm t6 010lps document number: ds 37590 rev. 2 - 2 6 of 7 www.diodes.com november 2016 ? diodes incorporated dm t6 010lps package outline dimensions please see http://www.diodes.com/package - outlines.html fo r the latest version. powerdi5060 - 8 dim min max typ a 0.90 1.10 1.00 a1 0.00 0.05 - b 0.33 0.51 0.41 b2 0.200 0.350 0.273 b3 0.40 0.80 0.60 c 0.230 0.330 0.277 d 5.15 bsc d1 4.70 5.10 4.90 d2 3.70 4.10 3.90 d3 3.90 4.30 4.10 e 6.15 bsc e1 5.60 6.00 5.80 e2 3.28 3.68 3.48 e3 3.99 4.39 4.19 e 1.27 bsc g 0.51 0.71 0.61 k 0.51 - - l 0.51 0.71 0.61 l1 0.100 0.200 0.175 m 3.235 4.035 3.635 m1 1.00 1.40 1.21 10o 12o 11o 1 6o 8o 7o all dimensions in mm suggested pad layout please see http://www.diodes.com/package - outlines.html for the latest version. dimensions value (in mm) c 1.270 g 0.660 g1 0.820 x 0.610 x1 4.100 x2 0.755 x 3 4.420 x 4 5.610 y 1.270 y1 0.600 y2 1. 020 y3 0.295 y 4 1. 825 y5 3.810 y6 0.180 y7 6.610 y7 x3 y2 y5 x1 g1 x c y(4x) g x2 y3 y4 y6 x4 y1 d1 e1 a l k m l1 d2 g e2 detail a 0(4x) a1 c e d e 1 detail a b (8x) e/2 1 01 (4x) m1 b2 (4x) b3 (4x) e3 d3
dm t6 010lps document number: ds 37590 rev. 2 - 2 7 of 7 www.diodes.com november 2016 ? diodes incorporated dm t6 010lps important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other c hanges without further notice to this document and any product described herein. diodes incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does diodes incorporated convey any license unde r its patent or trademark rights, nor the rights of others. any customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diod es incorporated website, harmless against all damages. diodes incorporated do es not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. should customers purchase or use diodes incorporated products for any unintended or unauthorized application, customers shall indemnify and hold diodes incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising ou t of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized a pplication. products described herein may be covered by one or more united states, international or foreign patents pending. product nam es and markings noted herein may also be covered by one or more united states, international or foreign trademarks. t his document is written in english but may be translated into multiple languages for reference. only the english version of this document is the final and determinative format released by diodes incorporated. life support diodes incorporated products ar e specifically not authorized for use as critical components in life support devices or systems without the express written approval of the chief executive officer of diodes incorporated. as used herein: a. life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided i n the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support device or system whose failure to perform can be reasonably expe cted to cause the failure of the life support device or to affect its safety or effectiven ess. customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support d evices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety - related re quirements concerning their products and any use of diodes incorporated products in such safety - critical, life support devices or systems, notwithstanding any devices - or systems - related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporated and its representatives against any damages arising out of the use of diodes incorporated products in such safety - critical, life support devices or systems. copyright ? 201 6 , diodes incorporated www.diodes.com
|
